Register Now
 

   
   
 
ruling glue

YGLUE™616A/B
 
DESCRIPTION: YGLUE™616A/B is a special liquid resin system, which is used in ruling or electronic sealing. It is composed of electric filler, living diluents and super additives. Cured product has excellence gloss surface, similarity agate, its hardness, electric property and inflaming retarding is also very good.
 
RECOMMEND USAGE: YGLUE™616A/B is applying to colluding and rowing in lamp decoration, glass frame, pattern or other handicraft surface. There is the excellent sticking among the metal, pottery, timber, glass, fiber products and hard plastic; other needs to cancel and draw the lines or the surface decorated
 
SURFACE PREPARATION: Ensure the surface preparations, and that the surface is clean and dry, free from dust, perfect degreasing. It is best that first chemical treatment, then coating, so can capture best adhesion.
 
APPEARANCE & CHARACTER:
YGLUE™616A                           YGLUE™616B
COLOR                                          Black, Red, White etc.       Clear
VISCOSITY(25℃, cps)                 4000-5000                              40-50
SPECIFIC GRAVITY(25℃)          1.6-1.7                                     1.0-1.05
FLASH  POINT(℃)                     210                                                 >240
 
MIX RATIO:                        YGLUE™616A                           YGLUE™616B
Weight ratio                                  4                                            1
 
POT LIFE: Pot life of mixing YGLUE™616A and YGLUE™616B , depending upon mixing total weight and operating temperature, generally 100g mixing weight, approximately 20-30 minutes at 25℃.
 
CURING CONDITION: Full curing time, depending upon curing temperature, lowest curing time as follow list:
TEMPERATURE                                                CURING TIME
25℃                                                                     3-4        hours
80℃(just)                                                            30          minutes
PROPERTIES
Volume resistivity 25 ℃                Ohm-cm              >1014
Surface resistivity 25 ℃                Ohm                   >1010
Dielectric strength 25 ℃                Kv/mm               16
Dielectric constant                         1KHZ                  4.2
Flexural strength                            kg/mm2             8-10
Impact strength                              kg/mm2             5-8
Hardness                                        SHORE-D            55
thermal deformation temperature    ℃                      80
Water absorption                            %24h                  <0.14
Volume shrinkage                             %                      0.26
inflaming retarding                             UL94                V-0
RECOMMEND TECHNIC: SURFACE PREPARATION→BASEBOARD PREHEATING (50-60℃) →GLUE MIXING→PROOFING →VACUUM DEFOAMING→CURING
 
CLEAN UP: Clean all tools and equipment at the end of each days work with organic solvent.
 
CLEANNESS & MAINTENANCE: Only use commonly cleaning method, e.g. mull dip in clear water, and do not use grinding cleaning tools. Had better not use organic solvent as detergent.
 
PACKING & STORAGE: YGLUE616A/B all act 30 kilograms per set. 6 months in an unopened can, kept in cool dry storage. Seal up for keeping after open the cover as early as possible.
 
NOTE Ratio must be just. For accelerating at room temperature, can heating baseboard with electric hot plate. Prevent shake, blow, and ensure surface level up. It is best that be forced after cured 12 hours. Curing at room temperature and dampness, the surface easy display fog, suggest curing at heated.
 
HEALTH & SAFETYAvoid swallowing. Wear suitable gloves and eye protection. As the YGLUE™616A/B is solvent free, it is relatively non-toxic and it is non-flammable. Spills can be removed by cloth or by using sand to absorb the glue. Once dry the product no longer dissolves in organic solvent. Remove from skin before glue dries.
 
TECHNICAL ADVICE Please contact KINGYORK (Tel: 0086-20-82377171, Fax: 0086-20-82399962, EMAIL: EPOTEX@21CN.COM).
       Updated 2003/8/1

 
Copyright © 2006 Guangzhou Kingyork New Materials Company. Tel:020-82381150 sales@kingyork.com Technic supported by:www.51kang.com