 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| artificial water |
Yglue™ 651A/BDESCRIPTION: YGLUE™651A/B is a no-solvent, low viscosity, special transparent liquid resin system, which is curing at room temperature or aggregated temperature. The product after curing is soft, which has excellent gloss surface, good transparency, high hardness, excellent adhesion and electric property. It can resist water, damp and good chemical resistance, also color stability outstanding
RECOMMEND USAGE: YGLUE™651A/B is suitable for sealing of the handicraft, artificial flower and artificial plant
SURFACE PREPARATION: Ensure the surface preparations, and that the surface is clean and dry, free from dust, perfect degreasing. It is best that first chemical treatment, then coating, so can capture best adhesion.
APPEARANCE & CHARACTER:
YGLUE™651A YGLUE™651B
COLOR Clear Clear
VISCOSITY(25℃, cps) 700-1500 20-30
SPECIFIC GRAVITY(25℃) 1.12±0.01 0.94±0.01
MIX RATIO: YGLUE™651A YGLUE™651B
Weight ratio 3 1
POT LIFE: Pot life of mixing YGLUE™651A and YGLUE™651B , depending upon mixing total weight and operating temperature, generally 100g mixing weight, approximately 30-40 minutes at 25℃.
CURING CONDITION: Full curing time, depending upon curing temperature, lowest curing time as follow list:
TEMPERATURE CURING TIME
25℃ 4 hours
PROPERTIES
Volume resistivity 25 ℃ Ohm-cm 1.35 *10 15
Surface resistivity 25 ℃ Ohm 1.2* 10 14
Dielectric strength 25 ℃ Kv/mm 16~18
Compressive strength kg/mm2 16
Tensile strength kg/mm2 12
thermal deformation temperature ℃ 100
Water absorption %24h <0.1
RECOMMEND TECHNIC: SURFACE PREPARATION→BASEBOARD PREHEATING (50-60℃) →GLUE MIXING→PROOFING →VACUUM DEFOAMING→CURING
CLEAN UP: Clean all tools and equipment at the end of each days work with organic solvent.
CLEANNESS & MAINTENANCE: Only use commonly cleaning method, e.g. mull dip in clear water, and do not use grinding cleaning tools. Had better not use organic solvent as detergent.
PACKING & STORAGE: YGLUE™651A/B all act 20 kilograms per set. 6 months in an unopened can, kept in cool dry storage. Seal up for keeping after open the cover as early as possible.
NOTE： Ratio must be just. For accelerating at room temperature, can heating baseboard with electric hot plate. Prevent shake, blow, and ensure surface level up. It is best that be forced after cured 12 hours. Curing at room temperature and dampness, the surface easy display fog, suggest curing at heated.
HEALTH & SAFETY：Avoid swallowing. Wear suitable gloves and eye protection. As the YGLUE™651A/B is solvent free, it is relatively non-toxic and it is non-flammable. Spills can be removed by cloth or by using sand to absorb the glue. Once dry the product no longer dissolves in organic solvent. Remove from skin before glue dries.
TECHNICAL ADVICE： Please contact KINGYORK (Tel: 0086-20-82377171, Fax: 0086-20-82399962, EMAIL: EPOTEX@21CN.COM).
Updated 2003/8/1 Yglue™ 6314A/B |
